VLAN TRUNKING - ROUTING AND SWITCHING

pada tanggal

 

Nama    : Genijayanti Waruwu

Kelas     : 12.4A.05

Nim        : 12190279

Tugas    : Pertemuan 9

 


Jawaban :


 

SW1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW1(config)#int range fa0/10-11

SW1(config-if)#switchport mode access

SW1(config-if)#switchport access vlan 10

SW1(config-if-range)#exit

SW1(config)#int vlan 20

SW1(config-if)#int fa0/20

SW1(config-if)#switchport mode access

SW1(config-if)#switchport access vlan 20

SW1(config-if)#end

SW1(config-if-range)#exit

SW1(config)#int vlan 20

SW1(config-if)#int fa0/20

SW1(config-if)#switchport mode access

SW1(config-if)#switchport access vlan 20

 

SW1(config-if)#show vlan brief

SW1#conf t

SW1#conf terminal

Enter configuration commands, one per line. End with CNTL/Z.

SW1(config)#int fa0/1

SW1(config-if)#sw

SW1(config-if)#switchport mode tr

SW1(config-if)#switchport mode trunk

 

SW1#copy run

% Incomplete command.

SW1#copy ru

SW1#copy running-config st

SW1#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]


 

SW2>en

SW2#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW2(config)#int vlan 10

SW2(config-if)#int fa0/10

SW2(config-if)#switchport mode access

SW2(config-if)#switchport access vlan 10

SW1(config-if)#end

SW2(config-if)#exit

SW2(config)#int vlan 20

SW2(config-if)#int fa0/20

SW2(config-if)#switchport mode access

SW2(config-if)#switchport access vlan 20

 

SW1(config-if)#show vlan brief

SW2#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW2(config)#int range fa0/1-2

SW2(config-if-range)#sw

SW2(config-if-range)#switchport mode tr

SW2(config-if-range)#switchport mode trunk

SW2#copy

% Incomplete command.

SW2#copy ru

SW2#copy running-config st

SW2#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]


 

SW3>en

SW3#conf t

Enter configuration commands, one per line. End with CNTL/Z.

SW3(config)#int vlan 10

SW3(config-if)#int fa0/10

SW3(config-if)#sw

SW3(config-if)#switchport mode ac

SW3(config-if)#switchport mode access

SW3(config-if)#sw

SW3(config-if)#switchport access vlan 10

SW1(config-if)#end

SW3(config)#int vlan 20

SW3(config-if)#int fa0/20

SW3(config-if)#switchport mode access

SW3(config-if)#switchport access vlan 20

SW1(config-if)#show vlan brief

 

SW3#conf t

SW3#conf terminal

Enter configuration commands, one per line. End with CNTL/Z.

SW3(config)#int fa0/1

SW3(config-if)#sw

SW3(config-if)#switchport mode

% Incomplete command.

SW3(config-if)#switchport mode tr

SW3(config-if)#switchport mode trunk

SW3(config-if)#end

SW3#copy

% Incomplete command.

SW3#copy ru

SW3#copy running-config st

SW3#copy running-config startup-config

Destination filename [startup-config]?

Building configuration...

[OK]



 

selesai

 

 


Komentar

Posting Komentar